$606 Rigol RP1001C Current Probe, Dc 300 Khz, 100a Peak Industrial Scientific Test, Measure Inspect Electrical Testing Rigol,Industrial Scientific , Test, Measure Inspect , Electrical Testing,RP1001C,Probe,,www.pricolproperty.com,$606,Current,Khz,,100a,Dc,/chinchayote268030.html,300,Peak Rigol,Industrial Scientific , Test, Measure Inspect , Electrical Testing,RP1001C,Probe,,www.pricolproperty.com,$606,Current,Khz,,100a,Dc,/chinchayote268030.html,300,Peak Rigol RP1001C Current Probe Dc 300 100a Peak Khz Tulsa Mall Rigol RP1001C Current Probe Dc 300 100a Peak Khz Tulsa Mall $606 Rigol RP1001C Current Probe, Dc 300 Khz, 100a Peak Industrial Scientific Test, Measure Inspect Electrical Testing

Rigol RP1001C Current Probe Dc 300 100a Peak Khz Tulsa Mall Deluxe

Rigol RP1001C Current Probe, Dc 300 Khz, 100a Peak

$606

Rigol RP1001C Current Probe, Dc 300 Khz, 100a Peak

|||

Product description

Rigol RP1001C Current Probe 100 A Peak AC/DC, 300kHzDC and AC Frequency range: DC to 300KHz Ranges of 0.01V/A,0.1V/A Battery powered 9V internal for maximum external noise suppression US 120 VAC power.The RP1001C current probe enables a general purpose oscilloscope to display AC and DC current signals upp too 100A Peak (70A RMS).The RP1001C current probe can also make AC and DC measurements with a multimeter by using the BNC-to-banana plug adapter.Figure 1: RP1001C Current ProbeConnection between the Current Probe and Oscilloscope Set the coupling mode of the oscilloscope to DC and connect the BNC connector of the RP1001C current probe to the oscilloscope input via dual-BNC coaxial cable. Move the Range switch to the 10 mV/A or 100 mV/A position to turn on the RP1001C current probe. At this point, the green battery indicator lights. Use the zero adjustment knob to adjust the probe to the proper DC offset. Note: when measuring DC signals, accurate DC value is possible only when the current probe is fixed at a certain position, otherwise, the change of the position of the probe will cause the DC drift. When measuring AC signals, users can move the current probe. Before connecting the current probe to circuit, open the test clamp and clamp it onto the conductor as shown in the figure below. Adjust the probe channel and oscilloscope as necessary to get a clear and stable view of the signal. At this point, you can see both the current components of AC and DC. Set the coupling mode of the oscilloscope to AC to see the current components of AC. The operation method of the current components of AC is the ratio of the voltage amplitude measured through the oscilloscope and the switch range currently selected of the current probe (50 mV/A or 500 mV/A). Note: The current drawn by different devices look much different than that of others. While the RMS current can only be used in low

Rigol RP1001C Current Probe, Dc 300 Khz, 100a Peak

Highlights

In focus
Sunrace SR-RDM30 Rear Derailleur 7-Speed, SGS w/o Bracket Grey

Learn what FAO is doing with regard to the current pandemic and its impacts on food and agriculture. Check out FAO COVID-19 Response and Recovery Programme.

Event
Register for the World Food Forum

Join young people from across the world from 1 - 5 October to drive awareness and mobilize resources in support of agri-food systems transformation.

Video
Pastoralists’ voices in 360

How peace in the Karamoja region is contributing to more sustainable and resilient food systems.

In focus
Real stories of real food heroes worldwide

Behind our food, there is always someone who produces, plants, harvests, fishes, or transports it as well as fosters sustainable solutions.